Manually Configuring a Snom 300, 320, 360, 370, 820, 821, 870 IP Phone for 3CX Phone System
This guide has been tested for Snom 300,320,360,370, 820, 821, 870 with firmware version 8.4.18. Be aware that different firmware revisions may have different web interface formats and functionality.
There is a known issue with using SNOM Phones as external extensions about which we are in discussions with SNOM to find a resolution. If you need to use a SNOM Phone as an external extension, you will need to implement the 3CX SIP Proxy Manager on a PC in the remote location.
The preferred method to configure a Snom Phone is via Provisioning. You can however follow this guide to manually configure your phone.
Configuring the Phone to Register with 3CX PhoneSystem
- Start up the phone and identify its IP Address by pressing the “Help” or “7” button. For this example we will assume the IP Address of the phone is 10.0.0.114, and IP Address of the 3CX PhoneSystem machine is 10.0.0.11
- Point your browser to the web interface of the phone: http://10.0.0.114
- We now need to set the phone to register with 3CX PhoneSystem. Go to the “Setup -> Identity 1” page, and in the “Login” tab:
a. Set the “Identity Active” field to “on”
b. Set the “Displayname” field to the name you want to appear on the Phone display
c. Set the “Account” field to the extension number you want to associate with this phone
d. Set the “Password” field to the extension’s Authentication Password
e. Set the “Registrar” field to the IP Address of the 3CX PhoneSystem machine – in this example, 10.0.0.11. (If you would like to specify the FQDN of the 3CX PhoneSystem machine instead of the IP Address, please review this FAQ first)
f. Set the “Authentication Name” field to the extension’s Authentication ID
g. Set the “Mailbox” field to your system’s Special Voice Mail Extension Number. (In a 3-digit installation, the default is “999” – you can check the correct value from the
h. “Settings -> General” page in the 3CX Management Console)
- Next, we need to adjust the audio parameters. Click on the “RTP” tab and set the “RTP Encryption” field to “off”
- Click the “Save” button, and then click the “Reboot” button that appears at the top of the page. Your phone will restart. After rebooting, the phone will retrieve its configuration files and register with the 3CX Phone System. This can be verified via the “Extension Status” page of the 3CX Management Console.
Configuring the BLF Keys (Including the Optional Snom Expansion Module)
You can also manually configure the Snom phone’s Function Keys (including the Expansion Module) to monitor the status of other extensions on the system.
- Go to “Setup -> Function Keys”
- For each button on the extension module, configure an extension to be monitored by setting in the “P1” row (for example):
a. The first field to “Active”
b. The second field to “BLF”
c. The third field to:
…where xxx is the extension number to be monitored, and yyy is the IP Address of the 3CX PhoneSystem machine. So if we want a key to monitor the status of extension number 120, and the IP Address of the 3CX PhoneSystem machine is 10.0.0.11, you should set it to:
Note that the “*20*” is the call pickup code. You can check the correct value from the “Dial Codes” tab in the “Settings -> Advanced” page
- Click the “Save” button at the bottom of the page, and then click the “Reboot” button that appears at the top of the page. Your phone will restart. After rebooting, the phone will register with the 3CX Phone System with the monitoring settings enabled.